#1. Product Introduction

1.1 function overview

Awesun Q1 is a consumer-grade intelligent remote control hardware created by Aweray ingenuity. It is designed for individual users with its core advantages of small and portable, high quality and low price. It perfectly meets the needs of diversified scenarios such as telecommuting and IT operation and maintenance. It uses the cutting-edge physical layer direct connection technology to get rid of the shackles of the network environment and realize the freedom of remote control of the equipment. Compact body easily into the pocket, anytime, anywhere open remote operation. Whether it is seamless docking of work equipment during telecommuting and efficient handling of emergency tasks; Or when IT operation and maintenance personnel go out to remotely troubleshoot and repair equipment failures, Awesun Q1 can become a right-hand man for individual users by virtue of its portability and efficiency, so that remote operation is no longer limited and efficiency is improved within reach. This paper mainly introduces Awesun's intelligent remote control hardware-Q1, which has the following characteristics: ① ultra small size, save space ② Bluetooth binding, double stability No need to install software, plug and play ④ BIOS level remote control ⑤ Guard dog protection

1.2 indicator light display

Indicator Status	Description
Off	Power off state
The red light is always on	Starting the system
Blinking red	No network connected/Q1 offline
Blue Light Flash	Bluetooth Not Connected/Not Bound
Blue light always on	Bluetooth connected
The green light is always on	The equipment is operating normally
Green light flashing slowly	Remote control in
Blue lights and green lights flash slowly in turn	Firmware upgrade
Flashing, flash, slow flash state description	Flashing: less than 2 times in 1s Flash: 3 times in 1s Slow flash: 1s on and 1s off

! Note: To reset Q1, press the reset button continuously for 5 seconds and then release it. To be observed that the indicator first shows a red light, and then the blue light starts to flash, indicating that the reset is successful.

1.3 resolution

Awesun Q1 transmits images through the HDMI interface and supports the following refresh frequencies and resolutions: Awesun Q1 Transmit picture through HDMI interface, support the following refresh frequency and resolution Refresh frequency: 60Hz

• • Resolution support: * * 1920 × 1080, 1680 × 1050, 1600 × 1200, 1600 × 900, 1440 × 900, 1400 × 1050, 1360 × 768, 1280 × 1024, 1280 × 800, 1280 × 720, 1024 × 768, 800 × 600, 720 × 480, 640 × 480

Refresh frequency: 30Hz

• • Resolution support: * * 1920 × 1080, 1280 × 720, 1024 × 768, 800 × 600

1.4 interface description

!

! Note: In order to make Q1 work properly, please make sure that all interfaces are connected correctly.

#2. Use the steps

2.1 binding Q1

When using Q1 for the first time, you need to bind Q1 to a Awesun account to realize remote control. Q1 supports binding between computer and mobile terminals. The following demonstrates the binding steps.

2.1.1 Mobile Terminal [recommend]]

2.1.1.1 Install Awesun Remote Control APP

(1) Visit the Awesun download site ( Visit me ), or install "Awesun remote control" through APP Store or Android application market ". ! (2) Take iOS system as an example. After successful installation, you need to log in to the Awesun account. If you do not register the account, you can directly register on the APP. !

2.1.1.2 Add

(1) Before adding Q1, it is preferred to ensure that the Bluetooth of the mobile phone is turned on and the positioning authority is turned on; (2) Power on Q1, and confirm that the indicator light is flashing blue; (3) Open the Awesun remote control App, click the add button "" in the upper right corner of the [Equipment] interface, and select "Add Intelligent Hardware"; (4) Wait for Q1 around App search. If it cannot be searched, you can manually select Q1 to add. !

2.1.1.3 Binding

(1) Ensure that Q1 is connected to the router/switch through the network cable, and select [Hardware is connected to the network cable and connected to the network through the network cable]]; (2) Q1 will be automatically connected, and the wired network will be configured, waiting for the distribution network; (3) Set Q1 device name and access password; (4) Confirm and click , the binding is successful. !

2.1.2 Computer side

(1) Install and run Awesun enterprise control software on the equipment in the same LAN as Q1 ( download ) (2) in the upper left corner, click []-> [add intelligent hardware], select "intelligent remote control hardware" !

(3) Confirm that the Q1 indicator is in the blue flash state, and click !

(4) At this time, the Awesun control terminal will scan the Awesun Q1 with unbound accounts in the local area network. After the scan is successful, click !

(5) After setting the access password, click . When the "Add Successful" prompt appears, Q1 has been successfully bound to the account !

2.2 function introduction

Mobile end as an example: After binding Q1, in the device list of the Awesun control terminal, the following function operations can be initiated for Q1: [desktop control], [desktop viewing], [SSH]]. ! * * Note: * * In order to make Q1 work normally, check whether the lower cables are connected properly before remote control.

2.2.1 Desktop Control

Control the remote host, can enter the mouse and keyboard commands to the remote host. ! Note: To initiate remote control operation to Q1 for the first time, the access password shall be entered for verification. !

2.2.2 Desktop viewing

Only the remote host screen is allowed to be viewed, and mouse and keyboard commands cannot be entered. !

2.2.3 SSH

The control can be controlled through remote SSH connection to check the network abnormality of the local area network where the control is located. Default user name: admin Password: aX & *>nsN.! @# !

#3. Set On the Q1 details page, click in the upper right corner to enter the Q1 Settings page. !

3.1 identification code

Q1 has an independent identification code, and can use other control terminals to input the corresponding identification code and verification code for remote connection. ! * * Note: * * View verification code and custom verification code need to operate in the same LAN. !

3.2 modify the access password

In order to avoid security risks, Q1 needs to plug in the network cable and be on the same network as the mobile phone to modify the access password. ! ## 3.3 Internet Settings Wired Internet, including DHCP and static IP two, can be set according to the actual network environment. ① DHCP: The router automatically assigns an IP address to the Internet and cannot change it. ② Static IP: Custom IP address !

3.4 add to desktop

Add Q1 device shortcuts to your phone desktop. !

3.5 About

You can view the current Q1 firmware version and information. !

3.6 Restart/Delete

① Click to restart Q1 ② Click to delete Q1 from the device list of the login account, and you need to rebind it next time you use it. !

#4. Remote control mobile phone function demonstration Presentation Environment Computer side: Awesun for Windows 15.8.4 Others: Awesun Q1, expansion dock, power cord, network cable, type-C cable, HDMI cable ! Note: The mobile phone needs to support the output of video images through the Type-C interface, and some mobile phones may be unusable due to hardware limitations or docking station compatibility issues. ① iOS keyboard and mouse control requires the master to open the function of the controlled mouse and ensure that the mobile phone has opened the auxiliary touch control. Android device keyboard and mouse control requires the master to open the function of the controlled mouse, and some models need to manually authorize the screen display permission. ② Expand the use of green dock brand recommend. !

4.1 Wiring Steps

Connect the mobile terminal to Q1 as prompted by the interface description (refer to the figure). !

4.2 remote control mobile phone

(1) the computer login Awesun personal version; !

(2) Select Q1 connected to the mobile phone and initiate remote control; !

(3) Remote control is successful. !

Related video: How to use Awesun Q1? Controllable BIOS, support all kinds of equipment! : Click to view On the new! How does Awesun Q1 remote control mobile phones and iPhone?: click to view